Release Notes¶
v0.28.0¶
Behavior changes
Rotation gate transpilers now keep the exact gate matrix (#598)
RX, RY and RZ have period 4π as matrices: RX(θ + 2π) = -RX(θ). Three transpilers reduced angles modulo 2π, so they could flip the sign of the gate matrix (a global phase of -1). They now use 4π:
NormalizeRotationTranspilernormalizes angles into[0, 4π)by default, instead of[0, 2π).cycle_rangenow accepts any range whose width is a multiple of 2π.FuseRotationTranspilerreduces fused angles modulo 4π.ZeroRotationEliminationTranspilerno longer removes rotations near 2π, because their matrix is-I.
Transpiled angles and gate counts can differ from 0.27.0. To get the previous output (equal up to global phase), pass the old range explicitly:
NormalizeRotationTranspiler(cycle_range=(0.0, 2 * np.pi))
Old shot count keywords are accepted again, with a deprecation warning (#606)
v0.27.0 renamed the shot count argument to shots without a compatibility alias (#585). The old keywords n_shots, measurement_cnt and shot_count now work again in the places below. They emit a DeprecationWarning and will be removed in a future release.
sample()of the Qiskit and Braket sampling backends, including the saved-data backends and the Qiskit Runtime primitive backendsample()of quantum states, andsample(shot_count=...)ofImmutableQuantumCircuitandImmutableParametricQuantumCircuitThe Qulacs vector state samplers, such as
create_qulacs_vector_state_sampler()sample_from_state_vector(),sample_from_density_matrix()and their ideal variants, the sampler fromcreate_sampler_from_sampling_backend(), and parametric samplers built withcreate_parametric_sampler_from_sampler()orcreate_parametric_state_sampler_from_state_sampler()(measurement_cnt)QURI Algo:
execute_qpe,analyze_qpe, the QPE estimators, the Hadamard test estimator and the time evolution estimators
Samplers from quri_parts.qulacs.sampler that take a circuit, such as create_qulacs_vector_sampler(), and the sampler from create_sampler_from_concurrent_sampler() still accept only shots.
The quantinuum extras now install the Nexus client (#614)
pip install "quri-sdk[quantinuum]" and pip install "quri-parts[quantinuum]" now install quri-parts-quantinuum[nexus], which adds qnexus, pytket and quri-parts-tket. If you only need circuit conversion and the native gate transpiler, install quri-parts-quantinuum alone.
Dependency changes
quri-parts-qiskitnow requiresqiskit>=2.2,<2.6(#613). On Linux, importing Qiskit 2.6.0 before Qulacs fails with a static TLS error (Qiskit/qiskit#17213).quri-parts-itensornow requiresjuliacall>=0.9.32,<0.10.0(#616). Older JuliaCall versions could crash the Python process with SIGSEGV when Julia shut down.
New features
Run circuits on Quantinuum devices through Nexus (#614)
quri_parts.quantinuum.backend.QuantinuumSamplingBackend submits sampling jobs through Quantinuum Nexus to Quantinuum systems (H-Series), their emulators and syntax checkers, and Nexus-hosted simulators.
import qnexus as qnx
from quri_parts.quantinuum.backend import QuantinuumSamplingBackend
qnx.login() # once per machine
backend = QuantinuumSamplingBackend("H2-1E")
job = backend.sample(circuit, shots=1000)
counts = job.result().counts
QuantinuumSamplingJob.from_id() recreates a job from its Nexus job id, so you can collect the results from another process, for example after an HPC batch job. Helios devices are not supported yet. See Sampling on Quantinuum devices for details.
Readout error simulation (#610)
quri_parts.core.sampling.create_readout_error_concurrent_sampler() wraps any ConcurrentSampler and flips each measured bit independently. You give the probabilities p0_to_1 and p1_to_0 as one value for all qubits or one value per qubit. Wrapping a noise-free sampler simulates readout errors with a single state vector simulation per circuit.
from quri_parts.core.sampling import create_readout_error_concurrent_sampler
from quri_parts.qulacs.sampler import create_qulacs_vector_concurrent_sampler
sampler = create_readout_error_concurrent_sampler(
create_qulacs_vector_concurrent_sampler(), p0_to_1=0.01, p1_to_0=0.02
)
Build MolecularSystem from PySCF objects (#599, #602)
In QURI Algo, MolecularSystem.from_pyscf() wraps an existing PySCF Mole or a converged mean-field object. Your SCF settings are kept, and a converged mean field is not run again. Unrestricted (UHF) mean fields are not supported yet.
MolecularSystem also gains:
hf_state,hf_energy,n_qubitsandn_electronsa
fermion_qubit_mappingoption (Jordan-Wigner by default)a
qubit_mappingproperty, to decode sampled states with the same mapping as the qubit Hamiltonian
Bug fixes
Converting two- and three-qubit
UnitaryMatrixgates between QURI Parts and tket could apply them to the wrong qubits, in both directions (#615)MeasurementNoisewithqubit_indiceswas applied to every qubit (#601)Converting Qsub programs to QRET failed with “Reallocate symbol” when sibling subcalls wrote to aux registers (#600)
The Qulacs vector samplers ignored
random_seedwhen they switched to multinomial sampling for large shot counts (#610)The type stub of
ImmutableParametricQuantumCircuit.sample()named the parameter argumentparaminstead ofparams, so validparams=calls failed type checking (#607)
Other changes
OpenFermionQubitMapping.inv_state_mapperis faster when decoding many states. The results are unchanged (#609)quri_algo.circuit_lib.qpenow uses named registers, like the deprecatedquri_parts.qsub.lib.qpe(#603)Documentation: the Qsub transpiler tutorial is now in the sidebar (#612), duplicate footnotes in the variational tutorial are fixed (#596), and the release notes for v0.26.3, v0.26.4 and v0.27.0 are added (#595)
For contributors
Lint CI now warns about missing docstrings on public modules, classes, functions and methods in the files that a PR changes (#597). The check does not fail the build yet.
What’s Changed
docs: add release notes for v0.26.3, v0.26.4 and v0.27.0 by @toru4838 in https://github.com/QunaSys/quri-sdk/pull/595
Fix duplicate footnote target names in the variational tutorial notebook by @templepmet in https://github.com/QunaSys/quri-sdk/pull/596
Ci/require docstrings on changed files by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/597
Fix NormalizeRotationTranspiler and FuseRotationTranspiler global phase by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/598
Add MolecularSystem.from_pyscf to wrap an existing Mole or mean field by @templepmet in https://github.com/QunaSys/quri-sdk/pull/599
Preserve MeasurementNoise qubit selection in resolver by @uedakoki in https://github.com/QunaSys/quri-sdk/pull/601
Give each qret subcall its own aux registers by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/600
Expose the qubit mapping of MolecularSystem by @templepmet in https://github.com/QunaSys/quri-sdk/pull/602
Align circuit_lib.qpe with its deprecated counterpart by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/603
Deprecate old shot-count kwargs instead of dropping them by @templepmet in https://github.com/QunaSys/quri-sdk/pull/606
Align the parametric sample() argument name with its stub by @templepmet in https://github.com/QunaSys/quri-sdk/pull/607
Decode OpenFermion qubit states with integer bit masks by @templepmet in https://github.com/QunaSys/quri-sdk/pull/609
Add a readout error wrapper for concurrent samplers by @templepmet in https://github.com/QunaSys/quri-sdk/pull/610
Add transpiler tutorial to docs sidebar by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/612
Constrain Qiskit below 2.6 to avoid TLS failures by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/613
Add QuantinuumSamplingBackend for job submission through Quantinuum Nexus by @toru4838 in https://github.com/QunaSys/quri-sdk/pull/614
Update JuliaCall to prevent shutdown crashes by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/616
Fix basis ordering in tket unitary conversion by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/615
Make concurrency tests independent of worker reuse by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/620
New Contributors
@uedakoki made their first contribution in https://github.com/QunaSys/quri-sdk/pull/601
Full Changelog: https://github.com/QunaSys/quri-sdk/compare/v0.27.0…v0.28.0
v0.27.0¶
Breaking changes
Qiskit 1.x is no longer supported (#579)
quri-parts-qiskit now requires qiskit>=2.2,<3 and qiskit-ibm-runtime>=0.47,<0.48 on every supported Python version. If you pin Qiskit 1.x, upgrading to 0.27.0 will either force a Qiskit major upgrade or fail to resolve.
The shot count argument is renamed from n_shots to shots (#585)
The rename has no compatibility alias, and it covers both QURI Parts and QURI Algo:
Sampler,ConcurrentSampler,StateSampler, and thesample()methods of the Qulacs, Qiskit, and Braket backendsquri_parts.core.statesampling helpers andshould_use_multinomialQURI Algo:
analyze_qpe, the QPE estimators, the Hadamard test estimator, and the time evolution estimator interface
Positional calls are unaffected. If you pass the value as a keyword argument, rename it:
# before
counts = sampler(circuit, n_shots=1000)
# after
counts = sampler(circuit, shots=1000)
Circuit repr now renders the circuit (#584)
ImmutableQuantumCircuit and parametric circuits render as ASCII art, so print(circuit) and notebook output now show a diagram instead of the object address. The new public helper quri_parts.circuit.utils.circuit_drawer.circuit_to_string() returns the same text. Code that compares circuit repr output (doctests, log assertions) needs updating.
Notices
Documentation has moved to quri-sdk.qunasys.com (#573, #574)
The QURI Parts documentation sites are superseded by the QURI SDK site, which is now built with Sphinx:
quri-parts.qunasys.comnow redirects to https://quri-sdk.qunasys.com/docs/tutorials/quri-parts/the standalone API site now redirects to https://quri-sdk.qunasys.com/api/
Supported Python versions
QURI SDK supports Python 3.10 to 3.14. Python 3.9 support was removed in v0.26.4.
Linux ARM wheels for quri-parts-rust (#577)
quri-parts-rust now ships prebuilt wheels for Linux aarch64, so ARM based machines (including ARM HPC nodes) install from a wheel instead of building the Rust extension from source.
For contributors
The build system moved from Poetry to uv (#570). Local setup is now
uv sync --all-groups. See CONTRIBUTING.md for details.
What’s Changed
Migrate from poetry to uv by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/570
Support Cbz and Label in qsub circuit conversion by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/572
Support all gates in GateSetConversionTranspiler by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/571
Migrate the documentation site to Sphinx by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/573
Redirect legacy QURI Parts documentation sites by @templepmet in https://github.com/QunaSys/quri-sdk/pull/574
Build quri-parts-rust wheels on Linux ARM by @templepmet in https://github.com/QunaSys/quri-sdk/pull/577
Support NumPy 2.5 in ThermalRelaxationNoise by @templepmet in https://github.com/QunaSys/quri-sdk/pull/578
Update deprecated qpe import in QPE reference notebook by @templepmet in https://github.com/QunaSys/quri-sdk/pull/580
Make SPE Gaussian sampler distribution return a real array by @templepmet in https://github.com/QunaSys/quri-sdk/pull/581
Patch qulacsvis’ Matplotlib drawer to support controlled SWAP gates by @templepmet in https://github.com/QunaSys/quri-sdk/pull/583
Better circuit visualization by @templepmet in https://github.com/QunaSys/quri-sdk/pull/584
Standardize shot count param name across Samplers by @templepmet in https://github.com/QunaSys/quri-sdk/pull/585
Add qsub transpiler tutorial (gate-set decomposition) by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/582
Support Qiskit 2 on Python 3.10–3.13 by @yasuhito in https://github.com/QunaSys/quri-sdk/pull/579
New Contributors
@yasuhito made their first contribution in https://github.com/QunaSys/quri-sdk/pull/579
Full Changelog: https://github.com/QunaSys/quri-sdk/compare/v0.26.4…v0.27.0
v0.26.3¶
What’s Changed
Fix qsub visualization bug with Cbz and Label by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/549
Trigger package workflow on release only by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/550
add quration tutorial docs by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/533
Fix false gate cache hits in QURIPartsEvaluatorHooks by @kwkbtr in https://github.com/QunaSys/quri-sdk/pull/552
Better representation of state vectors by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/512
Add TOFFOLI2CNOTTTranspiler by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/555
Add install instructions for
quri-parts-qscito QSCI tutorial by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/556Add Rot op by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/529
Update SeparateQURIPartsTranspiler by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/554
Point qpe deprecation notice to quri_algo.circuit_lib.qpe by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/557
[tensornetwork] Fix gate bug by @ThomasenQunasys in https://github.com/QunaSys/quri-sdk/pull/562
Bump version to 0.26.3 by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/561
Full Changelog: https://github.com/QunaSys/quri-sdk/compare/v0.26.2…v0.26.3
v0.26.4¶
What’s Changed
Update constraints and dependencies to support Python 3.9-3.14 in lockfile by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/551
Fix qubit count mismatch in 2_states tutorial notebook by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/566
Add RZ2HSTTranspiler, using pygridsynth for gridsynth by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/565
Drop Python 3.9 support by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/564
Add CliffordTSetTranspiler by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/567
Bump version to 0.26.4; run package CI on release PRs by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/563
Accept NumPy scalar angles in MC rotation gates by @templepmet in https://github.com/QunaSys/quri-sdk/pull/569
Full Changelog: https://github.com/QunaSys/quri-sdk/compare/v0.26.3…v0.26.4
v0.26.2¶
What’s Changed
Bump version to 0.26.2 by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/547
Supply pyqret via find-links in package test jobs by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/548
Full Changelog: https://github.com/QunaSys/quri-sdk/compare/v0.26.1…v0.26.2
v0.26.1¶
What’s Changed
remove conflict marker and resolve conflict by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/541
Release 0.26.1 by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/542
Require numpy 2 on Python==3.13 to fix Windows segfault by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/544
Temporary workaround for speeding up poetry lock by @kwkbtr in https://github.com/QunaSys/quri-sdk/pull/545
Release 0.26.1 by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/546
Full Changelog: https://github.com/QunaSys/quri-sdk/compare/v0.26.0…v0.26.1
v0.26.0¶
What’s Changed
implement quri-parts-qret package by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/522
Mc zero ctrl fix by @dchung0741 in https://github.com/QunaSys/quri-sdk/pull/537
Check Qubits and Registers in resolve() by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/523
Abstraction of qulacs API by qulacs backend by @templepmet in https://github.com/QunaSys/quri-sdk/pull/538
implement inverse() on ImmutableQuantumCircuit by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/534
Tensornetwork workspace by @ThomasenQunasys in https://github.com/QunaSys/quri-sdk/pull/539
Release 0.26.0 by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/540
New Contributors
@templepmet made their first contribution in https://github.com/QunaSys/quri-sdk/pull/538
Full Changelog: https://github.com/QunaSys/quri-sdk/compare/v0.25.1…v0.26.0
v0.25.1¶
What’s Changed
Fix broken link to Tutorials in README.md by @toru4838 in https://github.com/QunaSys/quri-sdk/pull/525
Qsub CompositeSubRepository and override mechanism by @dchung0741 in https://github.com/QunaSys/quri-sdk/pull/527
Qsub Quantum Register feature by @dchung0741 in https://github.com/QunaSys/quri-sdk/pull/528
Fix MultiControlledSub None ctrl value by @dchung0741 in https://github.com/QunaSys/quri-sdk/pull/531
fix: package release workflow failed for intel macos by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/526
Full Changelog: https://github.com/QunaSys/quri-sdk/compare/v0.25.0…v0.25.1
v0.25.0¶
What’s Changed
cargo update by @ThomasenQunasys in https://github.com/QunaSys/quri-sdk/pull/488
Tensor map bug by @ThomasenQunasys in https://github.com/QunaSys/quri-sdk/pull/487
Update molecular system by @peggjt in https://github.com/QunaSys/quri-sdk/pull/490
quri-parts-rust 0.24.1 by @ThomasenQunasys in https://github.com/QunaSys/quri-sdk/pull/491
remove html tags by @ThomasenQunasys in https://github.com/QunaSys/quri-sdk/pull/492
remove invalid environments by @ThomasenQunasys in https://github.com/QunaSys/quri-sdk/pull/493
Unified poetry lock by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/495
Chore/improve bit operations by @mutekichi in https://github.com/QunaSys/quri-sdk/pull/498
Add hashing on QuantumCircuit/ImmutableQuantumCircuit by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/496
Improve performance of add_UnitaryMatrix_gate #375 by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/497
Keep idle qubits after conversion by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/499
Add qubit-count validation when concatenating two circuits #389 by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/502
Remove hash implementation for QuantumCircuit, ParametricQuantumCircuit by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/500
Transpile qiskits ECR gates before conversion to qulacs by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/504
add script to install ibm-platform-services and ibm-cloud-sdk-core manually on CI by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/507
Support Python3.14 by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/489
Expose random seed argument for qulacs by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/509
run
poetry installfor onlydocgroup in quri-parts-doc.yaml by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/510optional openfermion, pyscf by @ThomasenQunasys in https://github.com/QunaSys/quri-sdk/pull/511
Move qsub derived component (qpe) from quri-parts into quri-algo by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/505
Remove dependency on quri-parts-qiskit from quri-parts-qulacs by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/514
Fix ctrl same q by @dchung0741 in https://github.com/QunaSys/quri-sdk/pull/516
Remove qiskit import from qulacs ECR test by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/518
Migrate device metadata collection module from quri-vm-internal PR #27 by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/519
Turn Quri VM into a namespace package by @nils-wittemeier in https://github.com/QunaSys/quri-sdk/pull/517
Add total qubit count evaluator by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/515
Fix MultiControlled expand bug by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/503
release 0.25.0 by @Kazutaka333 in https://github.com/QunaSys/quri-sdk/pull/524
New Contributors
@nils-wittemeier made their first contribution in https://github.com/QunaSys/quri-sdk/pull/495
@Kazutaka333 made their first contribution in https://github.com/QunaSys/quri-sdk/pull/507
Full Changelog: https://github.com/QunaSys/quri-sdk/compare/v0.24.1…v0.25.0
v0.24.1¶
What’s Changed
Performance improvement of collect_subs by @KKeita27 in https://github.com/QunaSys/quri-sdk/pull/476
Add cache for generating QURI Parts circuit from qsub by @KKeita27 in https://github.com/QunaSys/quri-sdk/pull/477
Qpe qft notebook by @dchung0741 in https://github.com/QunaSys/quri-sdk/pull/474
Fix incorrect qubit count in MC SubResolver by @kwkbtr in https://github.com/QunaSys/quri-sdk/pull/479
expanded the notebook on bell states. by @peggjt in https://github.com/QunaSys/quri-sdk/pull/475
add interface by @ThomasenQunasys in https://github.com/QunaSys/quri-sdk/pull/481
Fix sub collector cache by @dchung0741 in https://github.com/QunaSys/quri-sdk/pull/482
implement MC(Swap) -> MCX + CNOT by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/484
New Contributors
@KKeita27 made their first contribution in https://github.com/QunaSys/quri-sdk/pull/476
@peggjt made their first contribution in https://github.com/QunaSys/quri-sdk/pull/475
Full Changelog: https://github.com/QunaSys/quri-sdk/compare/v0.24.0…v0.24.1
v0.24.0¶
What’s Changed
TFIM notebook by @Mayank447 in https://github.com/QunaSys/quri-sdk/pull/465
delete 7 files in chem/transforms/*.py (except for init.py) by @KenzoMKN in https://github.com/QunaSys/quri-sdk/pull/467
Support MC gates and conversion by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/470
New Contributors
@KenzoMKN made their first contribution in https://github.com/QunaSys/quri-sdk/pull/467
Full Changelog: https://github.com/QunaSys/quri-sdk/compare/v0.23.0…v0.24.0
v0.23.0¶
What’s Changed
Update setup-tools-rust to 0.1.4 and update develop method by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/444
Fix inverse resolution and new Inverse Control resolver by @dchung0741 in https://github.com/QunaSys/quri-sdk/pull/446
Update license files by @toru4838 in https://github.com/QunaSys/quri-sdk/pull/448
Update license file by @toru4838 in https://github.com/QunaSys/quri-sdk/pull/449
Update license file by @toru4838 in https://github.com/QunaSys/quri-sdk/pull/451
Fix Makefile to fix installation problem by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/450
Update license file by @toru4838 in https://github.com/QunaSys/quri-sdk/pull/452
Update license files by @toru4838 in https://github.com/QunaSys/quri-sdk/pull/453
Swap insertion transpiler by @ThomasenQunasys in https://github.com/QunaSys/quri-sdk/pull/454
Use limited api by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/445
Update license files by @toru4838 in https://github.com/QunaSys/quri-sdk/pull/459
Update license file by @toru4838 in https://github.com/QunaSys/quri-sdk/pull/460
Support Python 3.13 by @yasuo-ozu in https://github.com/QunaSys/quri-sdk/pull/457
Quri sdk migration by @ThomasenQunasys in https://github.com/QunaSys/quri-sdk/pull/458
update version by @ThomasenQunasys in https://github.com/QunaSys/quri-sdk/pull/461
update pyproject and lock files by @ThomasenQunasys in https://github.com/QunaSys/quri-sdk/pull/463
remove defaults, fix download-artifact for quri-vm by @ThomasenQunasys in https://github.com/QunaSys/quri-sdk/pull/464
Full Changelog: https://github.com/QunaSys/quri-sdk/compare/v0.22.1…v0.23.0
v0.22.1¶
What’s Changed
TensorNetwork backend by @ThomasenQunasys in https://github.com/QunaSys/quri-parts/pull/436
Braket saving by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/423
Fix error of tensornetwork by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/437
Change README of OpenQASM by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/438
Fix api ref by @toru4838 in https://github.com/QunaSys/quri-parts/pull/439
fix sign mistake in controll h by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/441
add qpe.py by @ThomasenQunasys in https://github.com/QunaSys/quri-parts/pull/442
Integrate with setuptools-rust-bundled by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/431
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.22.0…v0.22.1
v0.22.0¶
What’s Changed
Change qsub version invariant by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/417
Update readme for qsub by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/419
Replace caching action with native actions/cache by @toru4838 in https://github.com/QunaSys/quri-parts/pull/420
Support pickling of ParametricQuantumCircuit by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/414
Add Python3.12 binary release by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/418
Use cibuildwheel to fix Ubuntu binary build by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/421
DeviceProperty for abstract FTQC devices by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/422
Clean top level imports by @Mutekichi in https://github.com/QunaSys/quri-parts/pull/425
Add missing Apache License headers by @toru4838 in https://github.com/QunaSys/quri-parts/pull/424
Fix import error by @toru4838 in https://github.com/QunaSys/quri-parts/pull/426
Update license files by @toru4838 in https://github.com/QunaSys/quri-parts/pull/427
Fix failing workflow for Ubuntu - Python3.12 by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/428
Primitive v2 by @henryliao85 in https://github.com/QunaSys/quri-parts/pull/398
Qsub Evaluator to be reusable by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/430
Default backend by @ThomasenQunasys in https://github.com/QunaSys/quri-parts/pull/432
fix CI by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/433
edit version by @ThomasenQunasys in https://github.com/QunaSys/quri-parts/pull/434
New Contributors
@Mutekichi made their first contribution in https://github.com/QunaSys/quri-parts/pull/425
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.21.0…v0.22.0
v0.21.0¶
What’s Changed
Fixed an error in STAR device where physical error rate exceed a certain value by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/385
Brickwork structured ansatz by @daito-quant in https://github.com/QunaSys/quri-parts/pull/391
Bug fix in conversion of PauliNoise to Qulacs by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/392
Bug fix in CircuitTranspiler for nisq_spcond_lattice DeviceProperty by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/395
add a measurement instruction for all qubits when converting QURI Parts quantum circuits to OpenQASM3 by @snuffkin in https://github.com/QunaSys/quri-parts/pull/400
Noise model for nisq devices by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/397
Convert Identity to RZ when braket backend device does not support i gate by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/403
Port qsub as a submodule by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/406
Fixed a bug that CliffrodRZSetTranspiler generates T or TDag gates by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/405
Enhance DeviceProperty for NISQ devices by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/411
Bug fix in conversion of Pauli / PauliRotation gate to Qiskit by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/412
New Contributors
@daito-quant made their first contribution in https://github.com/QunaSys/quri-parts/pull/391
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.20.3…v0.21.0
v0.20.3¶
What’s Changed
DeviceProperty: support transpiler only for analyze by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/381
Fix ITensors import by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/383
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.20.2…v0.20.3
v0.20.2¶
What’s Changed
Fix
QuantumCircuit.__eq__bug by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/375Change linux compatiblity tag to manylinux_2_24 by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/377
Rounding sampling by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/380
Revert “Change linux compatiblity tag to manylinux_2_24” by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/378
Release 0.20.2 by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/376
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.20.1…v0.20.2
v0.20.1¶
What’s Changed
Fix convert_circuit to Qulacs including TOFFOLI by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/373
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.20.0…v0.20.1
v0.20.0¶
What’s Changed
Update python version for license check workflow by @toru4838 in https://github.com/QunaSys/quri-parts/pull/353
Gate set conversion transpiler for STAR architecture by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/358
Update qulacs by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/359
Merge QuantumCircuit backend written in Rust by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/363
Fix python behavior to install quri-parts-rust package by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/365
Param sampler by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/367
Fix Python version requirements by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/366
Bug fix and add tests for CliffordConversionTranspiler by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/368
Qulacs dm gen sampler by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/369
Circuit cost estimator by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/370
Fix workflows (Update package.yml) by @toru4838 in https://github.com/QunaSys/quri-parts/pull/372
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.19.0…v0.20.0
0.19.0¶
New Features:
Arbitrary gate set conversion transpiler by @lqtmirage in #341
From qulacs converter by @HayatoYunoki in #342
Qiskit 1 update by @dchung0741 in #345
Make
ImmutableQuantumCircuit.depth()a cached property by @kwkbtr in #346Freeze the circuit before converting to a Qulacs circuit with a noise model by @kwkbtr in #347
Bug Fixes:
0.18.1¶
Bug Fixes:
Bug Fix:
draw_circuit()by @ayakatoayaka in #338Braket bug fix by @ThomasenQunasys in #340
0.18.0¶
New Features:
Bind param by dict by @dchung0741 in #326
Concurrent state sampler by @henryliao85 in #334
Faster
parity_sign_of_bits()by @HayatoYunoki in #336
Bug Fixes:
0.17.0¶
New Features:
New mapping interface tutorial by @dchung0741 in #309
State vector sampler by @dchung0741 in #317
Reduce CNOT Transpiler by @lqtmirage in #231
Qulacs general estimator by @dchung0741 in #319
General sampling estimator by @dchung0741 in #321
Post selection concurrrent sampler by @dchung0741 in #324
Bug Fixes:
Bug Fix: sz=0 ignored in post selection filter by @dchung0741 in #323
0.16.1¶
Bug Fixes:
Uccsd fix by @dchung0741 in #308
0.16.0¶
New Features:
Check operator estimatable by @dchung0741 in #272
Add __eq__() method to (Parametric)QuantumGate by @toru4838 in #277
Base ActiveSpaceMolecularOrbital class by @dchung0741 in #287
Default backend max shot by @dchung0741 in #289
add overload signature by @dchung0741 in #294
New fermion qubit interface by @dchung0741 in #283
Automatic general estimator creation by @dchung0741 in #293
Generic spin scbk by @dchung0741 in #298
Add TketTranspiler for optimization by @lqtmirage in #300
Caching grouped results and refactor sampling estimator by @dchung0741 in #302
Execute Pauli(Rotation)DecomposeTranspiler before converting circuit (quri-parts-itensor) - by @toru4838 in #274
fix empty circuit error by @dchung0741 in #303
Braket inv circuit converter by @dchung0741 in #304
Cache PauliLabel instances in a weakref dictionary by @kwkbtr,@toru4838 in #306
Bug Fixes:
0.15.1¶
Bug Fixes:
Bug fix, performance improvements (quri-parts-itensor) by @toru4838 in #240
Fix overlap estimator bug by @ThomasenQunasys in #252
0.15.0¶
New Features:
Quantum chemistry tutorials by @dchung0741 in #192
Sampling backend tutorials by @dchung0741 in #194
Limit execution time by @dchung0741 in #205
Inv multi pauli by @dchung0741 in #208
Inv unitary gate by @dchung0741 in #209
Force int time limit by @dchung0741 in #226
Allow to pass keyword arguments to itensor mps estimator for fast computation. by @terasakisatoshi in #203
Use QURI Parts gate names for QiskitTranspiler by @lqtmirage in #228
Marginal probability by @dchung0741 in #243
Transpiler tutorial by @lqtmirage in #234
Operator to sparse by @dchung0741 in #247
Bug Fixes:
Bug fix in fermion qubit mapping tutorial by @dchung0741 in #212
bug fix: correct adding gate in front of the circuit by @dchung0741 in #244
v0.14.0¶
What’s Changed
update tutorial by @tanan in https://github.com/QunaSys/quri-parts/pull/165
Relax version constraints for qiskit packages by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/174
Cost tracker by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/179
Spin symmetric uccsd by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/181
Kupccgsd identify parameter by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/185
Bug fix in convert empty circuit with noise model to qulacs by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/186
Add bit length by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/189
Python 3 11 fix by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/190
Inverse state mapper by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/154
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.13.0…v0.14.0
v0.13.0¶
What’s Changed
Fix dtype for ndarray in Optimizers by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/152
Save data from runtime by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/153
Add CircuitTranspiler to normalize rotation gate parameters by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/157
Streamlined hamiltonian by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/158
Multiply state by circuit by @tanan in https://github.com/QunaSys/quri-parts/pull/160
Post-selection by @wakuwaku414 in https://github.com/QunaSys/quri-parts/pull/82
Measurement support for
QuantumCircuitby @Zshan0 in https://github.com/QunaSys/quri-parts/pull/168Replacing unhashable defaults with factories by @BogdanRajkov in https://github.com/QunaSys/quri-parts/pull/171
Circuit drawer by @wakuwaku414 in https://github.com/QunaSys/quri-parts/pull/75
Fix release versioning by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/172
Allow Python 3.11 by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/173
New Contributors
@wakuwaku414 made their first contribution in https://github.com/QunaSys/quri-parts/pull/82
@BogdanRajkov made their first contribution in https://github.com/QunaSys/quri-parts/pull/171
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.12.0…v0.13.0
v0.12.0.post1¶
This is a release addressing an issue of release process.
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.12.0…v0.12.0.post1
v0.12.0¶
What’s Changed
Fix CliffordRZSetTranspiler by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/99
Sampling fix by @Zshan0 in https://github.com/QunaSys/quri-parts/pull/101
Fix UnitaryMatrix KAK decomposition and conversions to backends by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/117
Add fusing rotation gates to the preset gate set decomposition paths by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/118
Storing raw data from qiskit backend to json by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/125
Support computational basis state for evaluate state to vector by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/140
Bug fix in circuit converter with noise model to qulacs by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/141
Bug fix for single sampling job by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/143
Pre-compiled qulacs circuit by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/145
Qiskit primitive by @Zshan0 in https://github.com/QunaSys/quri-parts/pull/147
CI-related changes
Reduce execution time of GitHub Actions by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/116
Trigger lint CI when poetry.lock is updated by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/119
Fix document build: install all sub packages by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/126
Fix julia install by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/127
Change python version invariant by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/128
Yozu fix ci py ver by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/131
Yozu julia cache by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/132
Add lucking deps by @yasuo-ozu in https://github.com/QunaSys/quri-parts/pull/133
Unify python & poetry install to composite action by @y-yu in https://github.com/QunaSys/quri-parts/pull/122
New Contributors
@yasuo-ozu made their first contribution in https://github.com/QunaSys/quri-parts/pull/127
@y-yu made their first contribution in https://github.com/QunaSys/quri-parts/pull/122
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.11.0…v0.12.0
v0.11.0¶
What’s Changed
Add create_concurrent_parametric_estimator by @r-imai-quantum in https://github.com/QunaSys/quri-parts/pull/83
Update license files by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/86
Connectivity graph by @Zshan0 in https://github.com/QunaSys/quri-parts/pull/70
Stim simulator by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/88
Rewrite the check of hermiticity in mitigations by @rykojima in https://github.com/QunaSys/quri-parts/pull/89
Hessian by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/90
make stim version ^1.11.0 by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/91
Clifford + RZ decomposer by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/92
Custom gate filter for noise model by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/87
KAK decomposer for 2 qubit UnitaryMatrix gate by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/93
Add Qiskit transpiler by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/95
non-relativistic quantum chemistry by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/96
Tket converter by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/97
Fill diagonal elements of error_matrix from gradient estimators by @r-imai-quantum in https://github.com/QunaSys/quri-parts/pull/85
Include UnitaryMatrix gate decomposers in fixed gate set decomposers by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/98
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.10.0…v0.11.0
v0.10.0¶
What’s Changed
Add Identity elimination transpiler by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/53
Update license file by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/55
Transpiler for OpenQASM decomposing multi-Pauli (rotation) gates by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/52
Overlap estimator by @ThomasenQunasys in https://github.com/QunaSys/quri-parts/pull/56
Update grad tutorial by param shift by @tanan in https://github.com/QunaSys/quri-parts/pull/57
Add dependabot configuration by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/61
Dependabot config by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/67
Energy gradient by @toru4838 in https://github.com/QunaSys/quri-parts/pull/59
Update qulacs by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/60
Remove lock files under sub packages by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/68
Update poetry.lock by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/69
Change package name honeywell to quantinuum by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/76
Sampler with Qulacs-NoiseSampler by @rykojima in https://github.com/QunaSys/quri-parts/pull/6
Add Quantinuum native transpilers for effectiveness on a real device by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/77
Cirq to Quri-Parts converter by @rykojima in https://github.com/QunaSys/quri-parts/pull/78
Qiskit to Quri-Parts converter by @rykojima in https://github.com/QunaSys/quri-parts/pull/79
Rename test files by @rykojima in https://github.com/QunaSys/quri-parts/pull/80
Fix package description for quantinuum by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/81
New Contributors
@ThomasenQunasys made their first contribution in https://github.com/QunaSys/quri-parts/pull/56
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.9.2…v0.10.0
v0.9.2¶
What’s Changed
SqrtX gate support in quri-parts-openqasm by @snuffkin in https://github.com/QunaSys/quri-parts/pull/51
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.9.1…v0.9.2
v0.9.1¶
What’s Changed
Fix typos on OpenQASM gate name by @snuffkin in https://github.com/QunaSys/quri-parts/pull/49
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.9.0…v0.9.1
v0.9.0¶
What’s Changed
AllSinglesDoubles ansatz by @toru4838 in https://github.com/QunaSys/quri-parts/pull/40
ParticleConservingU1 ansatz by @toru4838 in https://github.com/QunaSys/quri-parts/pull/41
ParticleConservingU2 ansatz by @toru4838 in https://github.com/QunaSys/quri-parts/pull/42
GateFabric ansatz by @toru4838 in https://github.com/QunaSys/quri-parts/pull/43
UCCSD ansatz by @toru4838 in https://github.com/QunaSys/quri-parts/pull/44
KUpCCGSD ansatz by @toru4838 in https://github.com/QunaSys/quri-parts/pull/45
Add ITensor simulator backend by @speed1313 in https://github.com/QunaSys/quri-parts/pull/33
fix doc format by @speed1313 in https://github.com/QunaSys/quri-parts/pull/47
Fix location of NOTICE file in wheel packages by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/48
New Contributors
@speed1313 made their first contribution in https://github.com/QunaSys/quri-parts/pull/33
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.8.0…v0.9.0
v0.8.0¶
What’s Changed
Param shift grad estimator by @tanan in https://github.com/QunaSys/quri-parts/pull/37
Add Identity to RZ transpiler by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/38
Update black by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/36
Pin Poetry version to 1.4.0 by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/39
Feature vector simulator by @dchung0741 in https://github.com/QunaSys/quri-parts/pull/46
New Contributors
@dchung0741 made their first contribution in https://github.com/QunaSys/quri-parts/pull/36
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.7.1…v0.8.0
v0.7.1¶
What’s Changed
Update license files by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/32
Update license files by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/34
Apply Qiskit transpile on Qiskit sampling backend by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/35
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.7.0…v0.7.1
v0.7.0¶
What’s Changed
Add Toffoli gate by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/26
Fix license file by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/27
Toffoli to 2 qubit gates transpiler by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/28
Library-independent interfaces for the chemical calculation by @rykojima in https://github.com/QunaSys/quri-parts/pull/29
Add Qiskit backend by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/31
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.6.0…v0.7.0
v0.6.0¶
What’s Changed
Mitigation tutorials by @toru4838 in https://github.com/QunaSys/quri-parts/pull/17
IonQ native gates transpiler by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/18
Numerical differentiation by @toru4838 in https://github.com/QunaSys/quri-parts/pull/19
Introduce unitary matrix gate by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/20
Add init and typed for ions by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/21
Transpiler to decompose single qubit UnitaryMatrix gates into RY and RZ gates by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/23
add comma to OpenQASM’s two-qubit gate instructions by @snuffkin in https://github.com/QunaSys/quri-parts/pull/24
New Contributors
@snuffkin made their first contribution in https://github.com/QunaSys/quri-parts/pull/24
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.5.0…v0.6.0
v0.5.0¶
What’s Changed
OpenQASM 3.0 converter by @r-imai-quantum in https://github.com/QunaSys/quri-parts/pull/14
Corrected arguments of add gate methods by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/15
Honeywell native gates transpiler by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/16
New Contributors
@r-imai-quantum made their first contribution in https://github.com/QunaSys/quri-parts/pull/14
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.4.1…v0.5.0
v0.4.1¶
What’s Changed
estimator fix for pauli Identity group by @Kushargs in https://github.com/QunaSys/quri-parts/pull/10
Remodulation of
braket.htmodule as subpart ofbraket.backendby @Zshan0 in https://github.com/QunaSys/quri-parts/pull/11Add tests for inverse gate and gate creation methods by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/1
Add
gates_and_paramsproperty toUnboundParametricQuantumCircuitBaseby @toru4838 in https://github.com/QunaSys/quri-parts/pull/12Update license cache; avoid rate limit error on CI by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/13
New Contributors
@Kushargs made their first contribution in https://github.com/QunaSys/quri-parts/pull/10
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.4.0…v0.4.1
v0.4.0¶
What’s Changed
Clifford gate conjugation, has_trivial_parameter_mapping by @toru4838 in https://github.com/QunaSys/quri-parts/pull/8
Add a tutorial for sampling on a real device; small bug fix by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/9
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.3.0…v0.4.0
v0.3.0¶
What’s Changed
Transpiler module by @lqtmirage in https://github.com/QunaSys/quri-parts/pull/4
Relax version requirement for Qulacs by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/2
Remove an unused function on tutorial by @tanan in https://github.com/QunaSys/quri-parts/pull/3
Support qubit mapping on SamplingBackend by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/7
Changes for developers
Update actions-netlify by @kwkbtr in https://github.com/QunaSys/quri-parts/pull/5
Full Changelog: https://github.com/QunaSys/quri-parts/compare/v0.2.0…v0.3.0